PHOTOCELL CP (CUSTOMIZED)
FOR BETTER LIGHT WITH LESS POWER, USE SPECTRUM LUMINAIRES & ACCESSORIES.
AVAILABLE MODELS
We are a quality conscious company that places quality as the nucleus of all its endeavors. The entire production process is carefully monitored at every level and special attention is paid on the procurement of the raw materials.
Electrical Control Panel
This is a single light unit employing a series of high intensity special LEDs, and has been specially designed for use where a light source with an extended life (approx.50000 burning hours.) is desirable. The omni-directional light distribution is arranged so that the maximum light output, is obtained in the zone between 70 degrees above and 10 degrees below the horizontal with a maximum of candelas at 20 degrees above.
Lighting Control Panel
The body is a corrosion-resistance aluminium casting finished in aviation yellow epoxy paint finish and houses the electronic circuitry for the LEDs. The light source is protected by a thick clear glass dome mounted on a hinged cast bezel ring secured to the body by means of three stainless steel bolts.
Individual Switching Circuit For Aviation Obstruction Lights
This is a single light unit employing a series of high intensity special LEDs, and has been specially designed for use where a light source with an extended life (approx.50000 burning hours.) is desirable. The omni-directional light distribution is arranged so that the maximum light output, is obtained in the zone between 70 degrees above and 10 degrees below the horizontal with a maximum of candelas at 20 degrees above.
Photocell Controller For Automatic Switching ON/OFF Of The Aviation Obstruction Lights
The body is a corrosion-resistance aluminium casting finished in aviation yellow epoxy paint finish and houses the electronic circuitry for the LEDs. The light source is protected by a thick clear glass dome mounted on a hinged cast bezel ring secured to the body by means of three stainless steel bolts.
